WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER MAIN SEAL LH


    1. A01H039E01

      Loosen the clip labeled A in the illustration, and then remove the 3 clips and front fender main seal LH.

      Tech Tips

      Clip A cannot be removed.

  3. REMOVE FRONT FENDER WHEEL OPENING MOULDING LH

    A01H219

    1. Remove the 5 screws.

    2. Detach the clip and remove the moulding.

  4. REMOVE FRONT FENDER LINER LH


    1. A01GZJH

      Remove the 15 screws, 6 clips and front fender liner LH.

  5. DRAIN WASHER FLUID


    1. A01GZDN

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  6. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A01GWNA

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.