WASHER NOZZLE ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A01GZEIE01
      Standard measurement
      Area Specified Condition
      A 325 mm (12.8 in.)
      B 191.3 mm (7.53 in.)
      C 283.6 mm (11.2 in.)
      D 121.5 mm (4.78 in.)

      If the result is not as specified, replace the washer nozzle.