POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the intelligent tester


      1. Connect the intelligent tester to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Customize setting.

      5. Select the setting by referring to the table below.

        Door Lock
        Display Default Contents Setting Relevant ECU

        Auto Unlock/Shift

        (Unlock w/ power switch on (IG), shift P, speed 0 km/h (0 mph))

        ON*3

        OFF*4

        		 Function that unlocks all doors when lever is shifted to P from any position other than P while the power switch is on (IG) ON/OFF Main body ECU (Driver side junction block)

        All Unlock/Open-Close

        (All unlock w/ D door open-close)

        		 OFF Function that unlocks all other doors when opening driver door within 45 seconds after turning the power switch is on (IG) ON/OFF Main body ECU (Driver side junction block)

        Unlock Key Twice

        (Unlock w/ 2 times D key operation)

        OFF*1

        ON*2

        		 Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors. ON/OFF Main body ECU (Driver side junction block)

        Auto Lock/Shift

        (Auto lock/shift not P)

        		 OFF With engine running and all doors closed, function that locks all doors when lever is shifted to P from any position other than P ON/OFF Main body ECU (Driver side junction block)
        Auto Lock ON Function that locks all doors when vehicle speed reaches a certain level ON/OFF Main body ECU (Driver side junction block)

        • *1: for Europe, China

        • *2: except Europe, China

        • *3: for China

        • *4: except China

    2. Customizing with the Accessory meter assembly


      1. Turn the power switch on (IG).

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

        Door Lock Settings
        Display Default Contents Setting Relevant ECU
        Auto Lock by Speed On Function that locks all doors when the vehicle speed reaches a certain level On or Off Main body ECU (Driver side junction block)
        Auto Lock by Shift from P Off Function that locks all doors when the shift lever is moved out of P, with the power switch on (IG) and all doors closed On or Off Main body ECU (Driver side junction block)
        Auto Unlock by Shift to P

        On*3

        Off*4

        		 Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG) On or Off Main body ECU (Driver side junction block)
        Auto Unlock by Driver Door Off Function that unlocks the other doors when the driver door is opened within 45 seconds after the power switch is turned off On or Off Main body ECU (Driver side junction block)
        Unlock on Second Key Turn

        Off*1

        On*2

        		 Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the Off setting, turning it once unlocks all doors On or Off Main body ECU (Driver side junction block)

        • *1: for Europe, China

        • *2: except Europe, China

        • *3: for China

        • *4: except China