TURN SIGNAL FLASHER ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY


    1. Connect the connector.

    2. Attach the clamp to install the turn signal flasher assembly.

  2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here,

  4. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. A01GYICE02

      Attach the 3 claws.

  8. CHECK SRS WARNING LIGHT

    Click here