WIPER SWITCH INSTALLATION


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01H0RM

      Attach the claw to install the wiper switch.

    2. Connect the 2 connectors.

  2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)


    1. A01GWMM

      Attach the claw.

    2. Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.

    3. A01GW37

      Attach the 2 claws to install the lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

    4. Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.

  3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)


    1. Connect the connector.

    2. A01H0AV

      Attach the claw.

    3. Attach the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.

    4. A01GW37

      Attach the 2 claws to install the lower steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

    5. Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.