Click here

STOP LIGHT SWITCH ON-VEHICLE INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT STOP LIGHT SWITCH ASSEMBLY


    1. Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      A5-2 (L) - Body ground Brake pedal released Below 1 V
      Brake pedal pushed 11 to 14 V

      If the result is not as specified, replace the stop light switch assembly.

      Table 1. Text in Illustration
      *a

      Component without harness connected

      (Stop Light Switch Assembly)