Click here

HEADLIGHT DIMMER SWITCH INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY


    1. While loosening the band clamp, attach the claw to install the turn signal switch assembly.

  2. Click here

    INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Attach the claw to install the windshield wiper switch assembly.

    2. Connect the connectors.

  3. Click here

    INSTALL SPIRAL CABLE SUB- ASSEMBLY

    (Click here)

  4. Click here

    CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  5. Click here

    INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02

      Attach the battery service hole cover LH with the clip and fastening tape.

      Table 1. Text in Illustration
      *A for Standard
      *B for Ottoman
  6. Click here

    INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  7. Click here

    INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

  8. Click here

    INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

  9. Click here

    CHECK SRS WARNING LIGHT

    (Click here)