HEADLIGHT DIMMER SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY

    A01GZEN

    1. While loosening the band clamp, attach the claw to install the turn signal switch assembly.

  2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Attach the claw to install the windshield wiper switch assembly.

    2. Connect the connectors.

  3. INSTALL SPIRAL CABLE SUB- ASSEMBLY

    Click here

  4. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  6. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  7. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  8. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  9. CHECK SRS WARNING LIGHT

    Click here