TURN SIGNAL FLASHER ASSEMBLY ON-VEHICLE INSPECTION


  1. INSPECT TURN SIGNAL FLASHER ASSEMBLY

    A01H213E03
    Text in Illustration
    *a

    Component with harness connected

    (Turn Signal Flasher Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      L1-7 (GND) - Body ground Always Below 1 Ω

      • If the result is not as specified, replace the turn signal flasher assembly.

    2. A01H213E04
      Text in Illustration
      *a

      Component with harness connected

      (Turn Signal Flasher Assembly)

      Measure the voltage according to the value(s) in the table below.

      Standard Voltage
      Tester Connection Switch Condition Specified Condition
      L1-1 (IG) - L1-7 (GND) Power switch on (IG) 11 to 14 V
      L1-2 (LR) - L1-7 (GND) Hazard warning switch OFF Below 1 V
      Hazard warning switch ON 9 V or higher (60 to 120 times per minute)
      L1-3 (LL) - L1-7 (GND) Hazard warning switch OFF Below 1 V
      Hazard warning switch ON 9 V or higher (60 to 120 times per minute)
      L1-4 (+B) - L1-7 (GND) Always 11 to 14 V
      L1-5 (EL) - L1-7 (GND) Headlight dimmer switch (TURN L) OFF 9 V or higher
      Headlight dimmer switch (TURN L) ON Below 1 V
      L1-6 (ER) - L1-7 (GND) Headlight dimmer switch (TURN R) OFF 9 V or higher
      Headlight dimmer switch (TURN R) ON Below 1 V
      L1-8 (EHW) - L1-7 (GND) Hazard warning switch OFF 9 V or higher
      Hazard warning switch ON Below 1 V

      If the result is not as specified, replace the turn signal flasher assembly.