FOOTWELL LIGHT (for Front) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01GYFZ

    1. Remove the 2 screws.

    2. Detach the 2 claws as shown in the illustration and remove the No. 1 instrument panel under cover sub-assembly.

    3. Detach the 2 claws and disconnect the DLC3.

    4. Disconnect each connector and detach each wire harness clamp.

  2. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

    A01GYFE

    1. Detach the 2 claws to remove the No. 1 interior illumination light assembly LH.

  3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01GYHQ

    1. Detach the 4 claws and remove the No. 2 instrument panel under cover sub-assembly.

    2. Disconnect the connector.

  4. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

    A01GYFE

    1. Detach the 2 claws to remove the No. 1 interior illumination light assembly RH.