HEADLIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. Put protective tape around the headlight assembly LH.

    2. Attach the clip to install the headlight assembly LH.

    3. Install the 3 bolts.

      Torque:
      8.1 N*m  { 83 kgf*cm, 72 in.*lbf }

    4. Connect the connector.

      A01GZ39E01
      Text in Illustration
      *1 Protective Tape *2 -

  2. INSTALL FRONT BUMPER COVER

    Click here

  3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  5. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  6. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  8. ADJUST HEADLIGHT AIMING

    Click here

  9. ADJUST FOG LIGHT AIMING


    1. for Sport Package:

      Click here

    2. except Sport Package:

      Click here