Click here

HEADLIGHT ASSEMBLY REMOVAL

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

  2. Click here

    REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

  3. Click here

    REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Detach the 2 clips and remove the deck trim side board LH.

  4. Click here

    REMOVE BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02

      Detach the clip, fastening tape and remove the battery service hole cover LH.

      Table 1. Text in Illustration
      *A for Standard
      *B for Ottoman
      *1 Fastening Tape
  5. Click here

    PRECAUTION

    Note:

    After turning the power switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  6. Click here

    DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  7. Click here

    REMOVE FRONT BUMPER COVER

    (Click here)

  8. Click here

    REMOVE HEADLIGHT ASSEMBLY LH


    1. Put protective tape around the headlight assembly LH.

    2. Disconnect the connector.

    3. Remove the 3 bolts.

    4. A01GX5PE01

      Detach the clip to remove the headlight assembly LH.

      Table 2. Text in Illustration
      *1 Protective Tape - -