LIGHTING SYSTEM High Beam or Variable Shade Beam does not Operate

WIRING DIAGRAM

A01H11HE01

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK FOR DTC


    1. Check for DTC Click here.

      OK
      DTC output does not occur

    NG

    GO TO DIAGNOSTIC TROUBLE CODE CHART Click here

    OK

  2. PERFORM ACTIVE TEST USING GTS (VARIABLE SHADE BEAM)


    1. Using the GTS, perform the Active Test Click here.

      AHS
      Item Test Part Control Range
      Variable Shade Beam LH Variable shade beam LH operation OFF - ON
      Variable Shade Beam RH Variable shade beam RH operation OFF - ON
      OK
      Variable shade beam operates normally.

    NG

    REPLACE HEADLIGHT LED UNIT ASSEMBLY (FOR LO/HI BEAM) Click here

    OK

    GO TO PROBLEM SYMPTOMS TABLE ("LO/HI beam" headlight does not change to Hi-beam) Click here