LICENSE PLATE LIGHT ASSEMBLY INSTALLATION


  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Tech Tips

    Use the same procedure for both license plate lights.


    1. Connect the connector.

    2. Attach the 2 claws to install the license plate light assembly.

  2. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    1. Attach the 6 clips to install the luggage compartment door outside garnish.

    2. Install the 6 screws.

  3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    1. Attach the 4 claws to install the No. 3 luggage compartment door outside garnish.

  4. INSTALL REAR LIGHT ASSEMBLY LH


    1. w/o Rear Fog Light:


      1. Install the rear light assembly LH with the 2 nuts and 2 cap nuts.

        Torque:
        4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      2. Connect the connector.

        A01H29TE02
        Text in Illustration
        *1 Nut *2 Cap Nut

    2. w/ Rear Fog Light:


      1. Install the rear light assembly LH with the 2 nuts and 2 cap nuts.

        Torque:
        4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      2. Connect the connector.

        A01H0RJE01
        Text in Illustration
        *1 Nut *2 Cap Nut

  5. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL BACK DOOR TRIM COVER


    1. Attache the 10 clips to install the back door trim cover.

    2. Install the 4 clips.

  7. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH


    1. Attach the 3 claws to install the rear combination light service cover LH.

  8. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. Install the luggage compartment door hinge cover LH with the 3 clips.

  10. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL NO. 2 COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. Attach the 2 claws to install the No. 2 courtesy light assembly.

  12. INSTALL SWITCH BEZEL


    1. Attach the 2 claws to install the switch bezel.

  13. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. A01GYICE02

      Attach the 3 claws.