LIGHTING SYSTEM PRECAUTION


  1. PRECAUTION FOR USING AUXILIARY BATTERY DURING INSPECTION


    1. While using the auxiliary battery during inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.

  2. PRECAUTION FOR AUTOMATIC HIGH BEAM SYSTEM (w/ Automatic High Beam System)


    1. Windshield Replacement Precautions

      The timing of the change between high beams and low beams differs depending on the light transmission rate of the glass. For this reason, when replacing the windshield, replace it with an original equipment part.

    2. Inner Rear View Mirror Assembly (Automatic High Beam Sensor) Handling Precautions

      Failure to observe the following precautions may result in a malfunction:


      • Do not touch the lens of the inner rear view mirror assembly (automatic high beam sensor) with bare hands.

      • Do not allow anything to adhere to the inner rear view mirror assembly (automatic high beam sensor).

      • Do not subject the inner rear view mirror assembly (automatic high beam sensor) to strong impacts.

      • Do not allow any liquids to contact the inner rear view mirror assembly (automatic high beam sensor).

  3. PRECAUTION FOR ADAPTIVE HIGH BEAM SYSTEM (w/ Adaptive High Beam System)


    1. Windshield Replacement Precautions

      The timing of the change between high beams and low beams differs depending on the light transmission rate of the glass. For this reason, when replacing the windshield, replace it with an original equipment part.

    2. Inner Rear View Mirror Assembly (Adaptive High Beam System Sensor) Handling Precautions

      Failure to observe the following precautions may result in a malfunction:


      • Do not touch the lens of the inner rear view mirror assembly (adaptive high beam system sensor) with bare hands.

      • Do not allow anything to adhere to the inner rear view mirror assembly (adaptive high beam system sensor).

      • Do not subject the inner rear view mirror assembly (adaptive high beam system sensor) to strong impacts.

      • Do not allow any liquids to contact the inner rear view mirror assembly (adaptive high beam system sensor).