Click here

OBJECT RECOGNITION ECU REMOVAL

Click here
Click here Click here
Note:

When replacing the object recognition ECU, make sure to perform the replacement after confirming that the headlight assembly is securely installed.

Click here
  1. Click here

    REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

  2. Click here

    REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

  3. Click here

    REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Detach the 2 clips and remove the deck trim side board LH.

  4. Click here

    REMOVE BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02

      Detach the clip, fastening tape and remove the battery service hole cover LH.

      Table 1. Text in Illustration
      *A for Standard
      *B for Ottoman
      *1 Fastening Tape
  5. Click here

    REMOVE ROPE HOOK ASSEMBLY


    1. A01GWVA

      Remove the 4 bolts and 4 rope hook assemblies.

  6. Click here

    REMOVE DECK TRIM SIDE BOARD RH


    1. A01GX0VE03

      w/ Spare Tire:


      1. Remove the clip.

      2. Remove the deck trim side board RH.

    2. w/o Spare Tire:


      1. Detach the clip and remove the deck trim side board RH.

        Table 2. Text in Illustration
        *A w/ Spare Tire
        *B w/o Spare Tire
  7. Click here

    REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY


    1. Using a screwdriver, detach the 2 claws and remove the No. 1 luggage compartment light assembly.

      Tip:

      Tape the screwdriver tip before use.

      Table 3. Text in Illustration
      *1 Protective Tape

    2. Disconnect the connector.

  8. Click here

    REMOVE ROPE HOOK


    1. A01GYPFE01

      Remove the 4 rope hooks by pushing the claws in the direction of the arrows in the illustration.

  9. Click here

    REMOVE NO. 1 COOLER COVER (w/ Rear Cooler)


    1. A01GZDY

      Detach the 5 clips and remove the No. 1 cooler cover.

  10. Click here

    REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER


    1. A01GZ3DE02

      Remove the 3 clips.

    2. Detach the 4 claws and remove the front luggage compartment trim cover.

      Table 4. Text in Illustration
      *A w/o Rear Cooler
      *B w/ Rear Cooler
  11. Click here

    REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)

  12. Click here

    REMOVE TOOL BOX (w/o Spare Tire)


    1. A01H04I

      Remove the 2 clips and tool box.

  13. Click here

    REMOVE REAR FLOOR FINISH PLATE


    1. A01GW5P

      Remove the 3 clips.

    2. Detach the 4 clips and remove the rear floor finish plate.

  14. Click here

    REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A01H0XJ

      Remove the 2 clips.

    2. Detach the claw and luggage compartment trim cover assembly RH.

  15. Click here

    REMOVE OBJECT RECOGNITION ECU


    1. Disconnect the 2 connectors.

    2. Remove the 2 bolts.

    3. Detach the 2 clips and remove the object recognition ECU.

      Note:

      Do not drop or subject the object recognition ECU to strong shocks.