CRUISE CONTROL MAIN SWITCH INSTALLATION


  1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY


    1. A01GX8Z

      Connect the connector and install the cruise control main switch assembly.

    2. Install the 2 screws.

  2. INSTALL STEERING PAD


    1. Check that the power switch is off.

    2. Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

    3. A01GZ2ME01

      Connect the horn connector to the steering pad.

    4. Connect the 2 airbag connectors to the steering pad.

      Note


      • When connecting airbag connector, take care not to damage the airbag wire harness.

      • Be sure to only connect the connectors to each corresponding color.

      Text in Illustration
      *a Orange
      *b Black

    5. Push in the 2 airbag connector locks to connect the 2 airbag connectors.

    6. A01H04U

      Push the steering pad to attach the 3 pins carefully.

      Note


      • Make sure that the pins are securely inserted into the steering holes.

      • Make sure to attach the 2 upper pins first.

      • Make sure that the steering pad is securely installed.

  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER


    1. A01GXFP

      Attach the claw to install the lower No. 3 steering wheel cover.

  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER


    1. A01H1R6

      Attach the claw to install the lower No. 2 steering wheel cover.

  5. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  7. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  8. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  9. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI

  10. CHECK SRS WARNING LIGHT

    Click here