REAR CRANKSHAFT OIL SEAL REPLACEMENT


  1. REMOVE ENGINE ASSEMBLY

    Click here

  2. REMOVE REAR CRANKSHAFT OIL SEAL


    1. Using a knife, cut off the lip of the rear crankshaft oil seal.

    2. A01H0P0

      Remove the rear crankshaft oil seal with a screwdriver.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the rear crankshaft oil seal press fit hole and crankshaft.

  3. INSTALL REAR CRANKSHAFT OIL SEAL


    1. A01GZXGE01

      Using SST, tap in a new rear crankshaft oil seal until its surface is flush with the oil seal retainer edge.

      SST
      09223-15030
      09950-70010   ( 09951-07150 )

      Note


      • Keep the lip free from foreign matter.

      • Do not tap on the rear crankshaft oil seal at an angle.

  4. INSTALL ENGINE ASSEMBLY

    Click here