Click here

CYLINDER HEAD DISASSEMBLY

Click here
Click here Click here
Tip:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

Click here
  1. Click here

    REMOVE INTAKE VALVE


    1. A01H22LE02

      Using SST and wooden blocks, compress the compression spring and remove the valve retainer lock.

      09202-70020 09202-00010 09202-01010 09202-01020

    2. Remove the retainer, compression spring and valve.

      Tip:

      Arrange the removed parts in the correct order.

  2. Click here

    REMOVE EXHAUST VALVE


    1. A01GZ5SE01

      Using SST and wooden blocks, compress the compression spring and remove the valve retainer lock.

      09202-70020 09202-00010 09202-01010 09202-01020

    2. Remove the retainer, compression spring and valve.

      Tip:

      Arrange the removed parts in the correct order.

  3. Click here

    REMOVE VALVE STEM OIL SEAL


    1. A01GWNU

      Using needle-nose pliers, remove the oil seals.

  4. Click here

    REMOVE VALVE SPRING SEAT


    1. A01GZUQ

      Using compressed air and a magnet hand, remove the valve spring seat by blowing air onto it.

  5. Click here

    REMOVE NO. 1 STRAIGHT SCREW PLUG

    Note:

    If water leaks from the No. 1 screw plug or the plug is corroded, replace it.


    1. A01GZTKE05

      Using a 10 mm hexagon wrench, remove the 6 screw plugs and 6 gaskets.

  6. Click here

    REMOVE NO. 2 STRAIGHT SCREW PLUG


    1. A01H1RDE02

      Using a 14 mm hexagon wrench, remove the 2 screw plugs and 2 gaskets.

      Note:

      If water leaks from the No. 2 screw plug or the plug is corroded, replace it.

  7. Click here

    REMOVE STUD BOLT

    Note:

    If the stud bolt is deformed or its threads are damaged, replace it.