HEATED OXYGEN SENSOR REMOVAL

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.


  1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)


    1. A01GYB4E01

      Disconnect the heated oxygen sensor connector.

    2. Using SST, remove the heated oxygen sensor from the front exhaust pipe.

      SST
      09224-00010

  2. REMOVE FRONT DOOR SCUFF PLATE RH


    1. for Standard Body:

      Remove the front door scuff plate RH Click here.

    2. for Long Body:

      Remove the front door scuff plate RH Click here.

  3. REMOVE COWL SIDE TRIM BOARD RH


    1. for Standard Body:

      Remove the cowl side trim board RH Click here.

    2. for Long Body:

      Remove the cowl side trim board RH Click here.

  4. REMOVE FRONT FLOOR SILENCER PAD RH

  5. REMOVE REAR NO. 2 AIR DUCT

  6. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)


    1. A01GZYL

      Interior Side:

      Disconnect the heated oxygen sensor connector.

    2. Exterior Side:


      1. A01H0P9E01

        Remove the grommet.

      2. Using SST, remove the heated oxygen sensor from the front exhaust pipe.

        SST
        09224-00010