MASS AIR FLOW METER REMOVAL

Tech Tips

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01GZ6XE01

      While using both hands, lift the rear side of the V-bank cover sub-assembly upwards to detach the 4 clips labeled B. Slide the V-bank cover sub-assembly towards the front of the vehicle to detach the 2 clips labeled A, and remove the V-bank cover sub-assembly.

      Note

      The V-bank cover sub-assembly may be damaged if its front and rear are lifted at the same time.

  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY LH


    1. Disconnect the mass air flow meter sub-assembly connector.

    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap sub-assembly LH.

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY RH


    1. Disconnect the mass air flow meter sub-assembly connector.

    2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap sub-assembly RH.

  4. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1)


    1. A01GYH6

      Remove the 2 screws and mass air flow meter sub-assembly.

  5. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2)


    1. A01GZ4G

      Remove the 2 screws and mass air flow meter sub-assembly.