ECM INSTALLATION


  1. INSTALL ECM


    1. Install the 2 ECM brackets with the 4 screws.

    2. A01GWUV

      Install the ECM with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the 6 ECM connectors.

  2. CONNECT NO. 2 CONNECTOR HOLDER


    1. A01GYAWE01

      Attach the 2 claws to connect the No. 2 connector holder.

    2. Connect the 2 engine wire connectors.

  3. INSTALL HYBRID VEHICLE CONTROL ECU


    1. A01GXPE

      Install the hybrid vehicle control ECU with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect the 4 hybrid vehicle control ECU connectors.

  4. INSTALL ENGINE ROOM ECU COVER

    A01GW92

    1. Install the engine room ECU cover with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  5. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 5 clips.

  6. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY


    1. A01GWDEE01

      Attach the 4 clips labeled B.

      Note


      • Make sure the clips are attached securely.

      • Attaching the clips forcefully or hitting the top of the clips may damage them.

    2. Install the air cleaner inlet cover sub-assembly with the 5 clips labeled A.

  7. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL BATTERY SERVICE HOLE COVER LH


    1. A01GZIME02
      Text in Illustration
      *A for Standard
      *B for Ottoman

      Attach the battery service hole cover LH with the clip and fastening tape.

  9. INSTALL DECK TRIM SIDE BOARD LH (w/o Spare Tire)


    1. A01GXQQ

      Attach the 2 clips to install the deck trim side board LH.

  10. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire)

    A01GZ3P

  11. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Spare Tire)

    A01GWKI