BACK DOOR OUTSIDE GARNISH (w/o Tire Carrier) REASSEMBLY


  1. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Upper Side)

    Tech Tips

    When installing the back door outside garnish protector, heat the No. 2 back door outside garnish surface using a heat light.

    Standard
    Item Temperature
    No. 2 Back Door Outside Garnish 20 to 30°C (68 to 86°F)

    Note

    Do not heat the back door outside garnish excessively.


    1. Clean the No. 2 back door outside garnish surface.


      1. Using a heat light, heat the No. 2 back door outside garnish surface

      2. Remove the double-sided tape from the No. 2 back door outside garnish.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01DS6HE01

      Install a new back door outside garnish protector.


      1. Using a heat light, heat the No. 2 back door outside garnish.

      2. Remove the peeling paper from the face of the back door outside garnish protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door outside garnish protector as shown in the illustration.

        Tech Tips

        Press the back door outside garnish protector firmly to install it.

        Text in Illustration
        *1 Back Door Outside Garnish Protector

  2. INSTALL BACK DOOR OUTSIDE GARNISH PROTECTOR (for Lower Side)

    Tech Tips

    When installing the back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    Note

    Do not heat the back door outside garnish excessively.


    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface

      2. Remove the double-sided tape from the back door outside garnish sub-assembly.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A01DRFBE01

      Install a new back door outside garnish protector.


      1. Using a heat light, heat the back door outside garnish sub-assembly.

      2. Remove the peeling paper from the face of the back door outside garnish protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door outside garnish protector as shown in the illustration.

        Tech Tips

        Press the back door outside garnish protector firmly to install it.

        Text in Illustration
        *1 Back Door Outside Garnish Protector

  3. INSTALL BACK DOOR ELECTRICAL KEY SWITCH (w/ Entry and Start System)


    1. Attach the 2 guides to install the back door electrical key switch.

    2. Install the 2 screws.

    3. Attach the clamp.

  4. INSTALL NO. 1 BACK DOOR GARNISH RETAINER


    1. Install the No. 1 back door garnish retainer with the 3 screws.

  5. INSTALL LICENSE PLATE LIGHT ASSEMBLY


    1. Attach the 2 guides to install the license plate light assembly.

    2. Install the 4 screws.

  6. INSTALL LICENSE PLATE LIGHT CORD (w/o Entry and Start System)


    1. Connect the connector to install the license plate light cord.