BACK DOOR OUTSIDE GARNISH (w/ Tire Carrier) DISASSEMBLY


  1. REMOVE LICENSE PLATE LIGHT CORD (w/o Entry and Start System)

    A01DU05

    1. Disconnect the connector and remove the license plate light cord.

  2. REMOVE REAR LICENSE LIGHT COVER

    A01DQJK

    1. Remove the 5 screws and rear license light cover.

  3. REMOVE LUGGAGE ELECTRICAL KEY SWITCH (w/ Entry and Start System)


    1. A01DSG8

      Remove the 2 screws.

    2. Detach the 2 guides and remove the back door electrical key switch.

  4. REMOVE LICENSE PLATE LIGHT ASSEMBLY

    A01DPMD

    1. Remove the 4 screws and license plate light.

  5. REMOVE BACK DOOR ORNAMENT

    A01DOOYE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the back door ornament.

    2. Using a moulding remover, detach the 6 claws and remove the back door ornament.

      Note

      Tape the moulding remover tip before use.

  6. REMOVE BACK DOOR OUTSIDE GARNISH PROTECTOR


    1. A01DPAM

      for Rear Lower License Plate Bracket Stay:

      Remove the back door outside garnish protector.

    2. A01DPQ0

      for Rear License Light Cover:

      Remove the back door outside garnish protector.