BACK DOOR OUTSIDE GARNISH (w/ Tire Carrier) REMOVAL


  1. REMOVE CENTER BACK DOOR GARNISH


    1. A01DQF8

      Detach the 4 clips and remove the back door center garnish.

  2. REMOVE BACK DOOR SIDE GARNISH LH


    1. A01DN12

      Detach the 2 clips and claw and remove the back door side garnish.

  3. REMOVE BACK DOOR SIDE GARNISH RH


    1. A01DNDA

      Detach the 2 clips and claw and remove the back door side garnish.

  4. REMOVE BACK DOOR TRIM COVER


    1. A01DRRP

      Remove the back door trim cover as shown in the illustration.

  5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY


    1. A01DOTG

      Remove the upper tool box panel sub-assembly as shown in the illustration.

  6. REMOVE TOOL CASE


    1. A01DN08

      Detach the 2 claws and remove the tool case.

  7. REMOVE BACK DOOR INSIDE HANDLE BEZEL (for Face to Face Seat Type)


    1. A01DNME

      Remove the screw.

    2. Detach the 5 claws and remove the back door inside handle bezel.

  8. REMOVE BACK DOOR TRIM PANEL ASSEMBLY


    1. A01DLZT

      Detach the claw and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01DREP

      Remove the screw.

    3. w/o Back Door Tire Carrier:


      1. A01DUAH

        Remove the bolt.

      2. Detach the 15 clips and remove the back door trim panel assembly.

    4. w/ Back Door Tire Carrier:


      1. A01DQEH

        Remove the bolt.

      2. Detach the 16 clips and remove the back door trim panel assembly.

    5. for Face to Face Seat Type:


      1. A01DN76

        Remove the screw and bolt.

      2. Detach the 15 clips and remove the back door trim panel assembly.

  9. REMOVE BACK DOOR INSIDE HANDLE SUB-ASSEMBLY (for Face to Face Seat Type)


    1. A01DNIU

      Detach the guide.

    2. Detach the claws and remove the inside handle sub-assembly.

    3. Disconnect the 2 cables from the inside handle sub-assembly.

  10. REMOVE BACK DOOR SERVICE HOLE COVER


    1. A01DN2I

      Remove the service hole cover.

  11. REMOVE BACK DOOR OUTSIDE HANDLE LH


    1. w/ Back Door Tire Carrier:


      1. A01DSPEE01
        Text in Illustration
        *1 Hole Plug

        Remove the hole plug.

      2. Remove the 2 nuts and back door outside handle.

      3. Disconnect the cable.

    2. w/o Back Door Tire Carrier:


      1. A01DUD3

        Remove the 2 nuts and back door outside handle.

      2. Disconnect the cable.

  12. REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    A01DMJK

    1. Disconnect the connector and remove the 4 nuts.

    2. Detach the 4 clips and remove the back door outside garnish.