Click here

SIDE STEP REASSEMBLY

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart (Click here).

Click here
  1. Click here

    INSTALL STEP LIGHT ASSEMBLY (w/ Illumination)


    1. for 5 Door:


      1. Install the 2 lights with the 4 bolts.

    2. for 3 Door:


      1. Install the light with the 2 bolts.

  2. Click here

    INSTALL STEP LIGHT BRACKET (w/ Illumination)


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. Using the riveter, install the step light bracket with the 3 rivets as shown in the illustration.

      Tip:

      If the rivet cannot be cut, pull it once and cut it.

      Note:
      • A01DNJHE15

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

        Table 1. Text in Illustration
        *1 Riveter
        *2 Mandrel
        *a INCORRECT
        *b CORRECT
      • A01DU00E14

        Confirm that the rivets are seated properly against the step light bracket.

      • Do not tilt the riveter when installing the rivet to the step light bracket.

      • Do not leave any space between the rivet head and step light bracket.

        Table 2. Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
      • A01DN1UE13

        Do not leave any space between the step light bracket and step plate. Firmly hold together the 2 items while installing the rivet.

        Table 3. Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
  3. Click here

    INSTALL STEP LIGHT ASSEMBLY (w/ Illumination)


    1. A01DUG6

      Install the bulb.

    2. Turn the socket in the direction indicated by the arrow to install it.

  4. Click here

    INSTALL STEP PANEL WIRE LH (w/ Illumination)


    1. for 5 Door:


      1. Attach the 9 clamps to install the wire.

    2. for 3 Door:


      1. Attach the 5 clamps to install the wire.

  5. Click here

    INSTALL SIDE STEP BRACKET SUB-ASSEMBLY LH


    1. Install a nose piece to an air riveter or hand riveter.

    2. Insert the mandrel part of a new rivet into the nose piece.

    3. A01DPWD

      Using the riveter, install the side step bracket with 3 rivets as shown in the illustration.

      Tip:

      If the rivet cannot be cut, pull it once and cut it.

      Note:
      • A01DNJHE15

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

        Table 4. Text in Illustration
        *1 Riveter
        *2 Mandrel
        *a INCORRECT
        *b CORRECT
      • A01DU00E14

        Confirm that the rivets are seated properly against the side step bracket.

      • Do not tilt the riveter when installing the rivet to the side step bracket.

      • Do not leave any space between the rivet head and side step bracket.

        Table 5. Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
      • A01DN1UE13

        Do not leave any space between the side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.

        Table 6. Text in Illustration
        *1 Riveter
        *a INCORRECT
        *b CORRECT
  6. Click here

    INSTALL NO. 2 SIDE STEP PLATE COVER


    1. Install the No. 2 side step plate cover.

  7. Click here

    INSTALL STEP PLATE COVER LH


    1. Install the side step plate cover.

  8. Click here

    INSTALL STEP PLATE LH (for 5 Door)


    1. Attach the 17 claws to install the step plate.

    2. Install the 3 bolts and clip.

      2.3 N*m 24 kgf*cm 20 in.*lbf
  9. Click here

    INSTALL STEP PLATE LH (for 3 Door)


    1. Attach the 14 claws to install the step plate.

    2. Install the 3 bolts and clip.

      2.3 N*m 24 kgf*cm 20 in.*lbf
  10. Click here

    INSTALL NO. 2 ROCKER PANEL MOULDING PROTECTOR


    1. Install the No. 2 rocker panel moulding protector with the 2 bolts.

      3.0 N*m 31 kgf*cm 27 in.*lbf
  11. Click here

    INSTALL NO. 3 SIDE STEP BRACKET LH


    1. Install the No. 3 side step bracket with the 2 bolts.

      6.0 N*m 61 kgf*cm 53 in.*lbf
  12. Click here

    INSTALL NO. 2 SIDE STEP BRACKET LH


    1. Install the No. 2 side step bracket with the 2 bolts.

      6.0 N*m 61 kgf*cm 53 in.*lbf
  13. Click here

    INSTALL SIDE STEP BRACKET LH


    1. Install the side step bracket with the 2 bolts.

      6.0 N*m 61 kgf*cm 53 in.*lbf