FRONT BUMPER REASSEMBLY


  1. INSTALL LOWER NO. 1 RADIATOR GRILLE


    1. Attach the 18 claws to install the lower No. 1 radiator grille.

  2. INSTALL NO. 2 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Attach the 7 clamps to install the No. 2 engine room wire.

  3. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    A01DQK6E01
    Text in Illustration
    *1 Keyhole

    Tech Tips

    Use the same procedure to install the No. 1 ultrasonic sensor retainer on the other side.


    1. Align the keyhole and protrusion as shown in the illustration.

    2. Install the No. 1 ultrasonic sensor retainer to the front bumper cover.

      Note

      Do not damage the bumper cover with the protrusion when installing the retainer.

  4. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Tech Tips

    Use the same procedure to install the No. 1 ultrasonic sensor on the other side.


    1. Attach the 2 claws to install the No. 1 ultrasonic sensor.

    2. Connect the connector.

  5. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A01DP0M

      Attach the 2 claws to install the headlight washer actuator sub-assembly LH as shown in the illustration.

    2. A01DOSME01
      Text in Illustration
      *1 Headlight Cleaner Clamp B

      Push up the headlight cleaner clamp B to install it.

    3. A01DNW6E01
      Text in Illustration
      *1 Headlight Cleaner Clamp
      *2 Headlight Washer Actuator Sub-assembly LH
      *3 Headlight Cleaner Clamp B
      A01DTZQ Push Here

      Install the headlight washer actuator sub-assembly LH with the headlight cleaner clamp as shown in the illustration.

  6. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Attach the 5 clamps to install the No. 1 headlight cleaner hose to the front bumper cover.

    2. Connect the No. 1 headlight cleaner hose to the headlight washer actuator sub-assembly.

  8. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. Connect a new washer nozzle sub-assembly to the washer hose.

    2. Attach the 2 claws to install the washer nozzle sub-assembly.

  9. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL FOG LIGHT COVER LH (w/ Fog Light)


    1. Attach the 3 clips to install the fog light cover LH.

    2. Install the screw.

  11. INSTALL FOG LIGHT COVER RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. Attach the 2 guides to install the fog light assembly LH.

    2. Install the 2 screws.

    3. Connect the connector.

  13. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL FRONT BUMPER REINFORCEMENT STOPPER RH (w/ Fog Light)


    1. Attach the 2 claws to install the front bumper reinforcement stopper RH.

  15. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)


    1. Attach the 3 clips to install the front bumper hole cover LH.

    2. Install the screw.

  16. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)

    Tech Tips

    Use the same procedure described for the LH side.

  17. INSTALL FRONT SPOILER LH (w/ Front Spoiler)


    1. Install the front spoiler LH with the 2 front spoiler No. 1 retainers.

  18. INSTALL FRONT SPOILER RH (w/ Front Spoiler)

    Tech Tips

    Use the same procedure described for the LH side.

  19. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)


    1. Install the front bumper extension mounting bracket with the 2 screws.