Click here

TURN SIGNAL FLASHER ASSEMBLY INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL TURN SIGNAL FLASHER ASSEMBLY


    1. Install the turn signal flasher with the bolt.

    2. Connect the connector.

  2. Click here

    INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector and each cable.

    2. w/o Knee Airbag:


      1. Attach the 7 clips to install the lower instrument panel finish panel.

    3. w/ Knee Airbag:


      1. Attach the 14 clips to install the lower instrument panel finish panel.

    4. Install the 2 bolts <C>.

    5. Attach the 2 claws to close the cover.

  3. Click here

    INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Connect each connector.

    2. Attach the 4 clips to install the instrument panel finish panel.

  4. Click here

    INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)


    1. Connect each connector.

    2. Attach the 4 clips to install the instrument panel finish plate garnish.

  5. Click here

    INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)


    1. Attach the 3 clips to install the instrument cluster finish panel ornament.

  6. Click here

    INSTALL INSTRUMENT SIDE PANEL LH (for LHD)


    1. Attach the 5 clips, claw and 3 guides to install the instrument side panel.

  7. Click here

    INSTALL INSTRUMENT SIDE PANEL RH (for RHD)


    1. Connect the connector.

    2. Attach the 5 clips, claw and 3 guides to install the instrument side panel.

  8. Click here

    INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. for LHD:


      1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

    2. for RHD:


      1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

  9. Click here

    INSTALL COWL SIDE TRIM BOARD LH (for LHD)


    1. Attach the clip and claw to install the cowl side trim board.

    2. Install the clip.

  10. Click here

    INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Tip:

    Use the same procedure described for the LH side.

  11. Click here

    INSTALL DOOR SCUFF PLATE ASSEMBLY LH (for LHD)


    1. Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate.

  12. Click here

    INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Tip:

    Use the same procedure described for the LH side.