STOP LIGHT SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. Attach the 2 claws to install a new stop light switch mounting adjuster.

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY

    A01DQM2E01
    Text in Illustration
    *1 Brake Pedal
    *2 Stop Light Switch Mounting Adjuster
    *3 Stop Light Switch Assembly

    1. Install the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

      Note

      Do not depress the brake pedal.

    2. A01DU18E02
      Text in Illustration
      *1 Shaft
      *2 Stop Light Switch Assembly
      *a 1.5 to 2.5 mm

      Rotate the stop light switch assembly clockwise so that the clearance is between 1.5 and 2.5 mm (0.0590 and 0.0984 in.) as shown in the illustration.

      Note

      Do not depress the brake pedal.

    3. Check the stop light switch assembly clearance.

      Stop light switch assembly clearance
      1.5 to 2.5 mm (0.0590 to 0.0984 in.)

    4. Connect the connector to the stop light switch assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. for LHD:


      1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.

    2. for RHD:


      1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

      2. Install the screw.