HAZARD WARNING SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/o Display)


    1. Attach the 4 claws to install the hazard warning signal switch assembly.

  2. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/ Display)


    1. Attach the 2 claws to install the hazard warning signal switch assembly.

    2. Connect the connector.

  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Display)


    1. Connect each connector.

    2. Attach the 10 clips to install the center instrument cluster finish panel.

  4. INSTALL NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)

  5. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. Connect the connector.

    2. Attach the 4 clips to install the integration control and panel assembly.