HAZARD WARNING SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01DQRN

      Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Display)

    A01DQVK

    1. Detach the 10 clips and remove the center instrument cluster finish panel.

    2. Disconnect each connector.

  3. REMOVE NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System)

  4. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/o Display)

    A01DPEE

    1. Using a screwdriver, detach the 4 claws and remove the hazard warning signal switch assembly.

  5. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY (w/ Display)

    A01DUJN

    1. Disconnect the connector.

    2. Using a screwdriver, detach the 2 claws and remove the hazard warning signal switch assembly.