Click here

HEADLIGHT DIMMER SWITCH INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LH Side)


    1. A01DOKEE10

      Inspect the light control switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        20 (H) - 12 (E) Light control switch off 10 kΩ or higher
        18 (T) - 12 (E)
        19 (A) - 12 (E)
        19 (A) - 12 (E) Light control switch auto Below 1 Ω
        18 (T) - 12 (E) Light control switch tail Below 1 Ω
        18 (T) - 12 (E) Light control switch head Below 1 Ω
        20 (H) - 12 (E)

    2. Inspect the headlight dimmer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        11 (HU) - 12 (E) Headlight dimmer switch flash Below 1 Ω
        17 (HF) - 12 (E)
        11 (HU) - 12 (E) Headlight dimmer switch hi beam Below 1 Ω
        Tip:

        Perform the flash and high beam inspection with the light control switch on head.

    3. Inspect the turn signal switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        13 (TR) - 12 (E) Turn signal switch right turn Below 1 Ω
        13 (TR) - 12 (E) Turn signal switch right lane change Below 1 Ω
        13 (TR) - 12 (E) Turn signal switch neutral 10 kΩ or higher
        15 (TL) - 12 (E)
        15 (TL) - 12 (E) Turn signal switch left lane change Below 1 Ω
        15 (TL) - 12 (E) Turn signal switch left turn Below 1 Ω

    4. Inspect the fog light switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        4 (BFG) - 3 (LFG) Fog light switch off 10 kΩ or higher
        2 (B) - 3 (LFG)
        4 (BFG) - 3 (LFG) Front fog light switch on Below 1 Ω
        4 (BFG) - 3 (LFG) Rear fog light switch on Below 1 Ω
        2 (B) - 3 (LFG)

        If the result is not as specified, replace the headlight dimmer switch.

        Table 1. Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)
  2. Click here

    INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RH Side)


    1. A01DOKEE12

      Inspect the light control switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        11 (H) - 19 (EL) Light control switch off 10 kΩ or higher
        13 (T) - 19 (EL)
        12 (A) - 19 (EL)
        12 (A) - 19 (EL) Light control switch auto Below 1 Ω
        13 (T) - 19 (EL) Light control switch tail Below 1 Ω
        13 (T) - 19 (EL) Light control switch head Below 1 Ω
        11 (H) - 19 (EL)

    2. Inspect the headlight dimmer switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        20 (HU) - 19 (EL) Headlight dimmer switch flash Below 1 Ω
        14 (HF) - 19 (EL)
        20 (HU) - 19 (EL) Headlight dimmer switch hi beam Below 1 Ω
        Tip:

        Perform the flash and high beam inspection with the light control switch on head.

    3. Inspect the turn signal switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        16 (TR) - 19 (EL) Turn signal switch right turn Below 1 Ω
        16 (TR) - 19 (EL) Turn signal switch right lane change Below 1 Ω
        16 (TR) - 19 (EL) Turn signal switch neutral 10 kΩ or higher
        18 (TL) - 19 (EL)
        18 (TL) - 19 (EL) Turn signal switch left lane change Below 1 Ω
        18 (TL) - 19 (EL) Turn signal switch left turn Below 1 Ω

    4. Inspect the fog light switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        7 (BFG) - 8 (LFG) Fog light switch off 10 kΩ or higher
        9 (B) - 8 (LFG)
        7 (BFG) - 8 (LFG) Front fog light switch on Below 1 Ω
        7 (BFG) - 8 (LFG) Rear fog light switch on Below 1 Ω
        9 (B) - 8 (LFG)

        If the result is not as specified, replace the headlight dimmer switch.

        Table 2. Text in Illustration
        *a

        Component without harness connected

        (Headlight Dimmer Switch Assembly)