Click here

HEADLIGHT ASSEMBLY (for LED Headlight) REASSEMBLY

Click here
Click here Click here
Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

Click here
  1. Click here

    INSTALL FRONT BUMPER BAR REINFORCEMENT LH


    1. Install the front bumper bar reinforcement LH with the 2 screws.

  2. Click here

    INSTALL FRONT BUMPER BAR REINFORCEMENT LH


    1. Install the front bumper bar reinforcement LH with the 2 screws.

  3. Click here

    INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing to the headlight unit LH.

  4. Click here

    INSTALL HEADLIGHT LEVELING MOTOR LH


    1. A01DPIBE01

      Hold the LED unit in place, and then push in the end of the headlight leveling motor LH to connect it to the LED unit and install the headlight leveling motor LH.

      Table 1. Text in Illustration
      *1 LED Unit *2 End of Headlight Leveling Motor LH
    2. A01DRH9

      Rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration and attach the claw.

      Tip:

      For the headlight leveling motor RH, rotate it in the opposite direction of the arrow shown in the illustration to install it.

    3. Connect the connector.

  5. Click here

    INSTALL HEADLIGHT GASKET


    1. Install a new headlight gasket to the headlight socket cover.

  6. Click here

    INSTALL HEADLIGHT SOCKET COVER


    1. Attach the guide to install the headlight socket cover.

    2. Install the screw.

  7. Click here

    INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH


    1. Connect the connector.

    2. A01DT3K

      Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow to install it.

  8. Click here

    INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. A01DO0E

      Install the front turn signal light bulb to the front turn signal light bulb socket.

    2. A01DP72

      Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to connect them as a unit.

  9. Click here

    INSTALL NO. 2 HEADLIGHT BULB


    1. A01DLVQ

      Turn the No. 2 headlight bulb in the direction indicated by the arrow to install it.

      Note:

      Do not touch the glass part of the bulb.

    2. Connect the connector.