HEADLIGHT ASSEMBLY (for Halogen Headlight) REASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT BUMPER BAR REINFORCEMENT LH


    1. Install the front bumper bar reinforcement LH with the 2 screws.

  2. INSTALL FRONT BUMPER BAR REINFORCEMENT LH


    1. Install the front bumper bar reinforcement LH with the 2 screws.

  3. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing to the headlight unit LH.

  4. INSTALL HEADLIGHT LEVELING MOTOR LH (w/ Headlight Leveling)


    1. A01DOAWE02
      Text in Illustration
      *1 Aiming Screw

      Insert the headlight leveling motor LH and turn the aiming screw in the direction of the arrow shown in the illustration to install the headlight leveling motor LH.

    2. A01DOMV

      Rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration and attach the claw.

  5. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. A01DQ11

      Install the front turn signal light bulb to the front turn signal light bulb socket.

    2. A01DMVR

      Turn the front turn signal light bulb socket with the front turn signal light bulb in the direction indicated by the arrow to install them as a unit.

  6. INSTALL CLEARANCE LIGHT BULB


    1. A01DNER

      Install the clearance light bulb to the clearance light bulb socket.

    2. A01DR30

      Turn the clearance light bulb socket with the clearance light bulb in the direction indicated by the arrow to install them as a unit.

  7. INSTALL NO. 2 HEADLIGHT BULB


    1. A01DN30

      Turn the No. 2 headlight bulb in the direction indicated by the arrow to install it.

      Note

      Do not touch the glass part of the bulb.

  8. INSTALL NO. 1 HEADLIGHT BULB


    1. A01DQDB

      Turn the No. 1 headlight bulb in the direction indicated by the arrow to install it.

      Note

      Do not touch the glass part of the bulb.