REAR COMBINATION LIGHT ASSEMBLY REASSEMBLY

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH


    1. Connect the connector.

    2. A01DSB6

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.

    3. Attach the 4 clamps to install the rear combination light socket and wire sub-assembly LH.

  2. INSTALL BACK UP LIGHT BULB


    1. A01DQ0N

      Install the back up light bulb to the rear combination light socket and wire sub-assembly LH.

    2. A01DNB4

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.

  3. INSTALL REAR TURN SIGNAL LIGHT BULB


    1. A01DMCB

      Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly LH.

    2. A01DQ6V

      Turn the rear combination light socket and wire sub-assembly LH in the direction indicated by the arrow to connect it.

  4. INSTALL UPPER REAR BUMPER RETAINER LH


    1. Attach the 2 guides to install the upper rear bumper retainer LH.