RELAY (w/ Headlight Cleaner System) REMOVAL


  1. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. REMOVE RADIATOR GRILLE

    A01DRHPE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the radiator grille.

    2. Remove the 4 screws.

    3. Detach the 8 claws and remove the radiator grille.

  3. REMOVE FRONT BUMPER COVER


    1. A01DPU0

      Remove the 2 screws.

      Tech Tips

      Use the same procedure for the screws on the other side.

    2. A01DT5KE01
      Text in Illustration
      *1 Screw
      *2 Bolt A
      *3 Bolt B

      Remove the 2 screws.

    3. Remove the 2 bolts labeled A and 2 bolts labeled B.

    4. A01DM67E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper cover.

    5. Remove the 4 clips.

    6. Detach the 16 claws and remove the front bumper cover.

      Note

      Do not hold the middle of the front bumper cover, as it may become reformed.

    7. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Disconnect the 3 connectors.

    8. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Disconnect the connector.

    9. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Disconnect the 2 connectors.

    10. w/ Headlight Cleaner System:

      Disconnect the No. 1 headlight cleaner hose.

  4. REMOVE HEADLIGHT CLEANER CONTROL RELAY


    1. A01DQ5H

      Disconnect the connector.

    2. Detach the claw and remove the headlight cleaner control relay.