WASHER NOZZLE (for Front Side) ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01DNJME01
      Text in Illustration
      *1 Ceramic Line - -
      *a Upper Limit *b Standard
      *c Lower Limit - -
      A01DTZQ Washer Fluid Spray Area - -
      Standard Clearance
      Area Specified Condition Area Specified Condition
      A 78 mm (3.07 in.) B 213 mm (8.39 in.)
      C 158 mm (6.22 in.) D 124 mm (4.88 in.)

      Tech Tips

      If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.