Click here

WIPER SWITCH INSTALLATION

Click here
Click here Click here
Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

Click here
  1. Click here

    INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Attach the claw to install the windshield wiper switch assembly.

    2. w/ Rain Sensor:

      Connect the connector.

    3. w/o Rain Sensor:

      Connect the 2 connectors.

  2. Click here

    INSTALL UPPER STEERING COLUMN COVER


    1. Attach the 4 clips to install the upper steering column cover to the instrument cluster finish panel.

  3. Click here

    INSTALL LOWER STEERING COLUMN COVER


    1. Attach the 2 claws to install the lower steering cover.

    2. for Power Tilt and Power Telescopic:

      Install the screw.

    3. Turn the steering wheel to the right and left as necessary to install the 2 screws.

  4. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).