WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. REMOVE RADIATOR GRILLE

    A01DRHPE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the radiator grille.

    2. Remove the 4 screws.

    3. Detach the 8 claws and remove the radiator grille.

  3. REMOVE FRONT BUMPER COVER


    1. A01DPU0

      Remove the 2 screws.

      Tech Tips

      Use the same procedure for the screws on the other side.

    2. A01DT5KE01
      Text in Illustration
      *1 Screw
      *2 Bolt A
      *3 Bolt B

      Remove the 2 screws.

    3. Remove the 2 bolts labeled A and 2 bolts labeled B.

    4. A01DM67E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper cover.

    5. Remove the 4 clips.

    6. Detach the 16 claws and remove the front bumper cover.

      Note

      Do not hold the middle of the front bumper cover, as it may become reformed.

    7. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Disconnect the 3 connectors.

    8. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:

      Disconnect the connector.

    9. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:

      Disconnect the 2 connectors.

    10. w/ Headlight Cleaner System:

      Disconnect the No. 1 headlight cleaner hose.

  4. REMOVE WASHER INLET SUB-ASSEMBLY


    1. A01DNW7

      Detach the claw and remove the washer inlet sub-assembly.

  5. REMOVE WINDSHIELD WASHER JAR ASSEMBLY

    Click here

  6. REMOVE WASHER JAR PROTECTOR


    1. A01DUKX

      Detach the 2 claws and remove the washer jar protector.

  7. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A01DPLU

      Disconnect the connector.

    2. Remove the level warning switch assembly from the packing of the windshield washer jar assembly.