REAR WIPER MOTOR ON-VEHICLE INSPECTION


  1. INSPECT REAR WIPER MOTOR ASSEMBLY


    1. Operate the rear wiper motor assembly.

      Tech Tips

      The wiper motor does not operate if the back door and back door glass are not closed.

    2. Stop the rear wiper motor assembly operation.

    3. A01DO5NE01
      Text in Illustration
      *A w/o Back Door Tire Carrier
      *B w/ Back Door Tire Carrier
      *1 Ceramic Dot
      *a Upper Limit
      *b Lower Limit

      Align the blade tip with the mark on the glass as shown in the illustration.

    4. Check the automatic stop position.

      Tech Tips

      After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.

      Standard Clearance
      Area Specified Condition
      a 10 mm (0.394 in.)
      b 10 mm (0.394 in.)