Click here

FUEL LID LOCK CONTROL CABLE ASSEMBLY (for 5 Door) REMOVAL

Click here
Click here Click here
  1. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  2. Click here

    REMOVE FRONT SEAT ASSEMBLY (for RHD)


    1. for Manual Seat:

      Remove the front seat assembly (Click here).

    2. for Power Seat:

      Remove the front seat assembly (Click here).

  3. Click here

    REMOVE CONSOLE BOX ASSEMBLY (for RHD)


    1. for Automatic Transmission:

      Remove the console box assembly (Click here).

    2. for Manual Transmission:

      Remove the console box assembly (Click here).

    3. w/ Refrigerated Cool Box:

      Remove the console box assembly (Click here).

  4. Click here

    REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    1. for Manual Seat Type:

      Remove the rear No. 2 seat assembly (Click here).

    2. for Power Seat Type:

      Remove the rear No. 2 seat assembly (Click here).

    3. for Face to Face Seat Type:

      Remove the rear No. 2 seat assembly (Click here).

  5. Click here

    REMOVE REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)


    1. for 60/40 Split Slide Walk-in Seat Type LH Side:

      Remove the rear No. 1 seat assembly (Click here).

    2. for 60/40 Split Slide Walk-in Seat Type RH Side:

      Remove the rear No. 1 seat assembly (Click here).

  6. Click here

    REMOVE REAR NO. 1 SEATBACK ASSEMBLY (w/ Rear No. 1 Seat)


    1. for 60/40 Split Double-folding Seat Type LH Side:

      Remove the rear No. 1 seatback assembly (Click here).

    2. for 60/40 Split Double-folding Seat Type RH Side:

      Remove the rear No. 1 seatback assembly (Click here).

  7. Click here

    REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Tip:

    Use the same procedure for all rear No. 1 floor step covers.


    1. Using a screwdriver, detach the 2 claws and remove the rear No. 1 floor step cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 1. Text in Illustration
      *1 Protective Tape
  8. Click here

    REMOVE QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat)


    1. Remove the 2 bolts and quarter scuff plate.

  9. Click here

    REMOVE QUARTER SCUFF PLATE RH (for RHD, w/ Rear No. 2 Seat)

    Tip:

    Use the same procedure described for the LH side.

  10. Click here

    REMOVE REAR DOOR SCUFF PLATE LH


    1. Put protective tape around the rear door scuff plate.

    2. Using a screwdriver, detach the 3 clips, 6 claws and 2 guides and remove the rear door scuff plate.

      Tip:

      Tape the screwdriver tip before use.

      Table 2. Text in Illustration
      *1 Protective Tape
  11. Click here

    REMOVE REAR DOOR SCUFF PLATE RH (for RHD)

    Tip:

    Use the same procedure described for the LH side.

  12. Click here

    REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Remove the rear door opening trim weatherstrip.

  13. Click here

    REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Remove the tonneau cover.

  14. Click here

    REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Tip:

    Use the same procedure for the other front luggage compartment trim cover.


    1. Detach the 4 claws and remove the cap.

    2. A01DTUCE01

      Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.

      Table 3. Text in Illustration
      *1 Luggage Hold Belt Striker
  15. Click here

    REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Tip:

    Use the same procedure for the other front luggage compartment trim cover.


    1. Detach the 4 claws and remove the cap.

    2. A01DTUCE01

      Remove the bolt, luggage hold belt striker and front luggage compartment trim cover.

      Table 4. Text in Illustration
      *1 Luggage Hold Belt Striker
  16. Click here

    REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)


    1. Detach the 5 clips and 4 claws and remove the rear floor mat rear support plate.

  17. Click here

    REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)


    1. Remove the 3 bolts and floor side rail.

  18. Click here

    REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Tip:

    Use the same procedure described for the LH side.

  19. Click here

    REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)


    1. A01DNAME01

      Detach the 4 claws and remove the rear floor carpet.

      Table 5. Text in Illustration
      *A w/o Deck Rail *B w/ Deck Rail
      *C for Face to Face Seat Type - -
  20. Click here

    REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Tip:

    Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.


    1. Detach the 3 claws and remove the rear No. 1 seat outer lap belt anchor cover.

  21. Click here

    REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Tip:

    Use the same procedure for the other No. 1 luggage compartment trim hook.


    1. Remove the luggage compartment trim hook by turning it clockwise.

  22. Click here

    REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Tip:

    Use the same procedure for the other No. 1 tonneau cover holder cap.


    1. Using a screwdriver, detach the 2 claws and remove the No. 1 tonneau cover holder cap.

      Tip:

      Tape the screwdriver tip before use.

      Table 6. Text in Illustration
      *1 Protective Tape
  23. Click here

    REMOVE FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Tip:

    Use the same procedure for the other front deck side trim cover.


    1. Using a screwdriver, detach the 2 claws and remove the front deck side trim cover.

      Tip:

      Tape the screwdriver tip before use.

      Table 7. Text in Illustration
      *1 Protective Tape
  24. Click here

    REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Tip:

    Use the same procedure for all assist grip plugs.


    1. Using a screwdriver, detach the 2 claws and remove the assist grip plug.

      Tip:

      Tape the screwdriver tip before use.

      Table 8. Text in Illustration
      *1 Protective Tape
  25. Click here

    REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Tip:

    Use the same procedure for the other assist grip.


    1. Remove the 2 bolts and assist grip.

  26. Click here

    REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. w/o Rear No. 2 Seat:


      1. A01DSFL

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. A01DUCB

        Detach the 6 claws and 2 guides and disconnect the rear seatback lock control lever base.

      3. Remove the 4 bolts and 2 screws.

      4. Detach the 5 clips and 8 claws.

      5. A01DSVK

        Pass the rear seatback lock control lever base through the deck trim side panel and remove the deck trim side panel.

    2. w/ Rear No. 2 Seat:


      1. A01DSFL

        Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

      2. A01DNKI

        Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

      3. Remove the 2 bolts and 2 screws.

      4. A01DQR3

        Detach the 4 clips and 8 claws and remove the deck trim side panel.

  27. Click here

    REMOVE REAR QUARTER TRIM PANEL ASSEMBLY LH


    1. Move the rear shoulder belt anchor adjuster to the lowest position.

    2. Detach the 2 clips and 2 guides.

    3. Pass the rear No. 1 seat outer belt floor anchor through the front quarter trim panel and remove the front quarter trim panel.

  28. Click here

    REMOVE DOOR SCUFF PLATE ASSEMBLY LH


    1. Put protective tape around the door scuff plate.

    2. Using a screwdriver, detach the 4 clips, 10 claws and 2 guides and remove the door scuff plate.

      Tip:

      Tape the screwdriver tip before use.

      Table 9. Text in Illustration
      *1 Protective Tape
  29. Click here

    REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Tip:

    Use the same procedure described for the LH side.

  30. Click here

    REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. A01DSAV

      Detach the 3 claws.

    2. Remove the fuel lid lock control cable assembly and fuel lid lock open lever sub-assembly.

  31. Click here

    REMOVE FRONT FLOOR CARPET ASSEMBLY


    1. for LHD:


      1. A01DMJH

        Detach the 6 clamps and fold back the front floor carpet from the floor carpet hooks.

    2. for RHD:


      1. A01DSST

        Detach the 12 clamps and fold back the front floor carpet from the floor carpet hooks.

  32. Click here

    REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. A01DT1H

      Turn the cable counterclockwise and remove the cable from the retainer.

    2. A01DN5G

      Turn the lock retainer counterclockwise and remove the lock retainer.

    3. for LHD:


      1. Using a clip remover, detach the clamp labeled <A>.

      2. A01DNXJE01

        Detach the 13 clamps and remove the fuel lid lock control cable.

    4. for RHD:


      1. Using a clip remover, detach the 3 clamps labeled <A>.

      2. A01DQD2E01

        Detach the 14 clamps and remove the fuel lid lock control cable.