HOOD LOCK CONTROL CABLE ASSEMBLY REMOVAL


  1. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. REMOVE RADIATOR GRILLE

    A01DRHPE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the radiator grille.

    2. Remove the 4 screws.

    3. Detach the 8 claws and remove the radiator grille.

  3. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    A01DPI6

    1. Disconnect the sensor connector.

    2. Remove the 3 bolts and millimeter wave radar sensor assembly.

  4. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. A01DM8B

      Detach the 2 clamps and 2 guides and remove the hood lock release lever protector.

  5. REMOVE LOW PITCHED HORN ASSEMBLY (for LHD)

    A01DUQ8E01
    Text in Illustration
    *1 Connector

    1. Disconnect the connector.

    2. Remove the bolt and low pitched horn.

  6. REMOVE HIGH PITCHED HORN ASSEMBLY (for LHD)

    A01DPWAE01
    Text in Illustration
    *1 Connector

    1. Disconnect the connector.

    2. Remove the bolt and high pitched horn.

  7. REMOVE HOOD LOCK CONTROL CABLE COVER


    1. A01DPQWE03
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 2 screws.

    2. Detach the claw and remove the hood lock control cable cover.

  8. REMOVE HOOD LOCK ASSEMBLY (for LHD)


    1. A01DT1X

      Remove the 3 bolts.

    2. w/ Engine Hood Courtesy Switch:


      1. A01DRB3E01
        Text in Illustration
        *A w/ Engine Hood Courtesy Switch

        Disconnect the connector.

    3. Disconnect the hood lock control cable and remove the hood lock assembly.

  9. REMOVE HOOD LOCK ASSEMBLY (for RHD)


    1. A01DPVW

      Remove the 3 bolts.

    2. w/ Engine Hood Courtesy Switch:


      1. A01DTQRE01
        Text in Illustration
        *A w/ Engine Hood Courtesy Switch

        Disconnect the connector.

    3. Disconnect the hood lock control cable and remove the hood lock assembly.

  10. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. for LHD:


      1. A01DNHBE01
        Text in Illustration
        *1 Protector
        *2 Fuel Lid Lock Control Cable
        *3 Hood Lock Control Cable
        *4 Clamp

        Detach the clamp as shown in the illustration.

      2. A01DRO6

        Detach the 3 claws.

      3. A01DPEQ

        Remove the hood lock control cable assembly and hood lock control lever sub-assembly.

    2. for RHD:


      1. A01DUB0

        Detach the 3 claws.

      2. A01DPEQ

        Remove the hood lock control cable assembly and hood lock control lever sub-assembly.

  11. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)


    1. Using a screwdriver, detach the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

      A01DOY1E01
      Text in Illustration
      *A for Engine Room Side - -
      *1 Hood Lock Control Cable *2 Stopper

  12. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)


    1. Using a screwdriver, detach the clamps shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Pull the hood lock control cable assembly from the engine compartment and remove it.

      A01DR4GE01
      Text in Illustration
      *A for Engine Room Side - -
      *1 Hood Lock Control Cable *2 Stopper
      *3 Rear Washer Hose - -