WINDOW DEFOGGER WIRE REPAIR


  1. REPAIR DEFOGGER WIRE

    A01DPM3E16

    1. Clean the broken wire tips with grease, wax and silicone remover.

    2. Place masking tape along both sides of the wire.

    3. Thoroughly mix the repair agent.

      DuPont paste
      No. 4817 or equivalent
    4. A01DR14E12

      Using a fine tip brush, apply a small amount of the agent to the wire.

    5. After a few minutes, remove the masking tape.

      Note

      Do not repair the defogger wire again for at least 24 hours.