BACK WINDOW STAY DISPOSAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. DISPOSE OF BACK WINDOW STAY ASSEMBLY LH


    1. A01DPHVE01

      Horizontally secure the back window stay in a vise with the piston-rod pulled out.

    2. Wear safety glasses. Gradually cut an area between A and B shown in the illustration using a metal saw and gradually release the gas.

      Standard
      Area Specified Condition
      a 80 mm (3.15 in.)
      b 20 mm (0.787 in.)

      CAUTION:

      As metal debris may be blown outward by the gas, you must:


      • Wear protective glasses.

      • Cover the area being cut.

      Note

      The gas inside the back window stay is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back window stay with a piece of cloth or other material.