REAR POWER WINDOW SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. Attach the 2 claws to install the rear power window regulator switch assembly.

  2. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP LH


    1. A01DMDO

      Attach the 3 claws to install the rear door inner glass weatherstrip as shown in the illustration.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01DRR0

      Install the clamp to the door panel.

    2. Connect the rear door lock remote control cable assembly and rear door inside locking cable assembly.

    3. Connect each connector.

    4. A01DLYZ

      Attach the rear door trim board sub-assembly by attaching the 4 claws of the rear door inner glass weatherstrip as shown in the illustration.

    5. Attach the 9 clips and install the rear door trim board sub-assembly.

    6. Install the 3 screws.

  4. INSTALL ASSIST GRIP COVER LH


    1. A01DQ1J

      Attach the 8 claws to install the assist grip cover.

  5. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH


    1. A01DQBR

      Attach the 3 claws to install the door inside handle bezel.