ROOF HEADLINING (for 5 Door) DISASSEMBLY

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE ROOF SIDE AIR OUTLET REGISTER (w/ Rear Air Conditioning System)

    A01DRZ3

    Tech Tips

    Use the same procedure for all roof side air outlet registers.


    1. Detach 6 claws and remove the roof side air outlet register.

  2. REMOVE NO. 1 ROOF SILENCER PAD (w/o Sliding Roof)

    A01DQED

    1. Remove the 2 No. 1 roof silencer pads.

  3. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)

    A01DM6Q

    1. Remove the No. 2 roof silencer pad.

  4. REMOVE NO. 3 ROOF SILENCER PAD

    A01DONL

    1. Remove the No. 3 roof silencer pad.

  5. REMOVE NO. 4 ROOF SILENCER PAD (w/o Sliding Roof)

    A01DPSK

    1. Remove the No. 4 roof silencer pad.

  6. REMOVE VANITY LIGHT ASSEMBLY LH

    A01DT6EE02
    Text in Illustration
    *1 Claw A
    *2 Claw B
    *3 Bulb Holder

    1. Detach the 2 claws labeled A and separate the bulb holder from the vanity light as shown in the illustration.

    2. Detach the claw labeled B and remove the vanity light.

  7. REMOVE VANITY LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE NO. 1 ROOF WIRE


    1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

    2. Detach each clamp and remove the No. 1 roof wire.

    3. Remove any butyl tape remaining on the roof headlining.

      A01DSB4E01
      Text in Illustration
      *A w/o Sliding Roof *B w/ Sliding Roof
      *C w/ Rear Seat Entertainment System *D w/ Rain Sensor, for LHD
      *E w/ EC Mirror *F w/ Rain Sensor, for RHD
      *1 Visor Connector - -

  9. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. w/o Sliding Roof:

      A01DS4OE01
      Text in Illustration
      *A for Diversity *B for Diversity, w/ Digital Audio Broadcasting

      1. Detach the No. 2 antenna cord sub-assembly from the 6 clamps and the notch on the rear of the roof headlining assembly.

      2. for Diversity:

        Detach the No. 2 antenna cord sub-assembly from the 6 clamps and the 2 notches on the rear of the roof headlining assembly.

      3. for Diversity, w/ Digital Audio Broadcasting:

        Detach the No. 2 antenna cord sub-assembly from the 7 clamps and the 2 notches on the rear of the roof headlining assembly.

      4. Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

      5. Remove the double-sided tape from the roof headlining assembly.

    2. w/ Sliding Roof:

      A01DNA5E01
      Text in Illustration
      *A for Diversity *B for Diversity, w/ Digital Audio Broadcasting

      1. Detach the No. 2 antenna cord sub-assembly from the 11 clamps and the notch on the rear of the roof headlining assembly.

      2. for Diversity:

        Detach the No. 2 antenna cord sub-assembly from the 11 clamps and the 2 notches on the rear of the roof headlining assembly.

      3. for Diversity, w/ Digital Audio Broadcasting:

        Detach the No. 2 antenna cord sub-assembly from the 12 clamps and the 2 notches on the rear of the roof headlining assembly.

      4. Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

      5. Remove the double-sided tape from the roof headlining assembly.