FRONT CONSOLE BOX (for Manual Transmission) REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. A01DQRN

      Detach the 4 clips.

    2. Disconnect the connector and remove the integration control and panel assembly.

  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    A01DT7H

    1. Detach the 4 clips and remove the instrument panel finish panel end LH.

  3. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    A01DNL5

    1. Detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    A01DPKP

    1. Detach the 4 clips and remove the instrument panel finish panel end RH.

  5. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Tech Tips

    Use the same procedure described for the No. 2 instrument panel finish panel cushion.

  6. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    1. w/o Seat Heater System:


      1. A01DULFE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the front console upper panel garnish.

      2. Detach the 5 clips and remove the front console upper panel garnish.

      3. Disconnect the connector.

    2. w/o Seat Heater System:


      1. A01DOBAE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the front console upper panel garnish.

      2. Detach the 5 clips and remove the front console upper panel garnish.

      3. Disconnect each connector.

    3. w/ Climate Control Seat System:


      1. A01DPWHE01
        Text in Illustration
        *1 Protective Tape

        Put protective tape around the front console upper panel garnish.

      2. Detach the 5 clips and remove the front console upper panel garnish.

      3. Disconnect each connector.

  7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01DSZY

    1. for LHD:


      1. Remove the screw.

      2. Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover.

      3. Disconnect each connector.

    2. A01DORU

      for RHD:


      1. Remove the screw.

      2. Detach the 3 clips and 2 guides and remove the No. 1 instrument panel under cover.

      3. Disconnect each connector.

  8. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

    A01DSBB

    1. Detach the 2 clips and guide and remove the front No. 1 console box insert.

  9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Remove the screw.

    2. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover.

      A01DNTKE01
      Text in Illustration
      *A for LHD *B for RHD

  10. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

    A01DMFI

    1. Detach the 2 clips and guide and remove the front No. 2 console box insert.

  11. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    A01DS26

    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

  12. REMOVE CONSOLE PANEL SUB-ASSEMBLY

    A01DMYAE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the console panel.

    2. Using a moulding remover, detach the 8 clips and 2 claws.

    3. Disconnect each connector and remove the console panel.

  13. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

    A01DMC8

    1. Detach the 4 claws.

    2. Disconnect the 2 clamps and remove the No. 1 heater to register duct.

  14. REMOVE NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

    A01DT35

    1. Remove the clip and No. 1 console box duct.

  15. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    A01DSLR

    1. Detach the 4 clips and 4 claws.

    2. Disconnect each connector and remove the rear console end panel.

  16. REMOVE REAR CONSOLE BOX ASSEMBLY

    A01DMLF

    1. Remove the 2 screws, clip and 5 bolts.

    2. Disconnect each connector and remove the rear console box.