VOLTAGE INVERTER (for 3 Door) INSTALLATION

INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

1. Connect the connector.

2. Attach the 9 claws and 11 clips to install the deck trim side panel.

3. Install the 3 bolts and 2 screws.

4. Install the rear No. 1 seat outer belt floor anchor with the bolt.

   Torque:

   42 N*m  { 428 kgf*cm, 31 ft.*lbf }

5. Install the front seat outer belt floor anchor with the bolt.

   Torque:

   42 N*m  { 428 kgf*cm, 31 ft.*lbf }

INSTALL OUTER LAP BELT ANCHOR COVER

1. Attach the 3 claws to install the outer lap belt anchor cover.

INSTALL QUARTER TRIM POCKET TRAY

1. Attach the 6 claws and 2 guides to install the quarter trim pocket tray.

INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

1. Attach the 2 claws to install the front deck side trim cover.

INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

1. Attach the 2 claws to install the tonneau cover holder cap.

INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

1. Install the No. 1 luggage compartment trim hook so that it is positioned horizontally.

INSTALL REAR FLOOR CARPET ASSEMBLY

1. Install the rear floor carpet.

INSTALL QUARTER TRIM COVER HOLE RH

INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

1. Attach the 6 claws to install the rear floor mat rear support plate.

2. Install the 5 screws.

INSTALL MAT SET PLATE COVER

1. Attach the 2 claws to install the mat set plate cover.

INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

1. Install the tonneau cover.

INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

INSTALL DOOR SCUFF PLATE ASSEMBLY RH