Click here

COMPRESSOR (for 5L-E) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE COOLER BRACKET


    1. Detach the clamp.

    2. Remove the screw and cooler bracket.

  2. Click here

    REMOVE MAGNET CLUTCH ASSEMBLY


    1. Clamp the cooler compressor in a vise.

    2. Using SST, hold the magnet clutch hub.

      09985-00270

    3. Remove the bolt, magnet clutch hub and magnet clutch washer.

      Tip:

      There is no set number of magnet clutch washers since they are used for adjusting.

    4. A01DN37

      Using a snap ring expander, remove the snap ring and magnet clutch rotor.

      Note:

      Do not damage the seal cover of the bearing when removing the snap ring.

    5. Disconnect the connector.

    6. A01DNHX

      Using a snap ring expander, remove the snap ring and magnet clutch stator.