REAR CENTER SEAT OUTER BELT ASSEMBLY (for 60/40 Split Tumble Seat Type LH Side) INSPECTION


  1. INSPECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    A01DR1CE01
    Text in Illustration
    *a Unlock
    *b Lock
    *c 45°

    Note

    Do not disassemble the retractor.


    1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is more than 45°, check that the belt locks.

      If the operation is not as specified, replace the No. 1 seat 3 point type belt assembly LH.